Home / Products / HSR-6010 Water-Based Chloroprene Spray Adhesive
HSR-6010 Water-Based Chloroprene Spray Adhesive
Model: HSR-6010
Fast-drying water-based spray adhesive with excellent initial tack — materials can be positioned approximately 1 minute after spraying.
- Position materials approximately 1 minute after spraying
- Excellent initial tack for quick positioning
- Fast-drying, even spray application
Packaging: 20 kg / pail
Overview
Fast drying. Excellent initial tack. HSR-6010 is a water-based chloroprene spray adhesive designed for efficient bonding of foam, fabric, leather and selected multi-material assemblies. Its fast-drying formulation and excellent initial tack allow materials to be positioned approximately 1 minute after spraying, supporting efficient upholstery, loudspeaker covering and automotive interior assembly. Actual positioning time depends on temperature, humidity, spray coverage and substrate.
The approximately 1-minute figure refers to early material positioning, as confirmed by the supplier. The supplied TDS specifies a 10–30 minute flash-off period before joining; validate the selected bonding process on the actual materials. The supplied TDS reports best tensile strength after approximately 24 hours.
Suitable substrates include foam, leather, PU leather, fabric, wood and selected PVC, PP and ABS grades. Verify surface preparation and adhesion on the actual materials, especially low-surface-energy plastics.
The supplied SDS contains general reference information. Request the current product-specific SDS before use.
Technical specifications
| Adhesive type | Water-based chloroprene spray adhesive |
|---|---|
| Appearance | Milky white liquid |
| Solids content | 48 ± 2% |
| Viscosity at 25°C | 100 ± 30 cP |
| Application temperature | 5–45°C |
| Application humidity | Relative humidity <80% |
| Spray distance | Approximately 15–20 cm |
| Flash-off time | 10–30 minutes; adjust to temperature and humidity |
| Strength development | Best tensile strength after approximately 24 hours, per supplied TDS |
| Storage / transport | 5–45°C; protect from freezing and direct sunlight |
| Packaging | 20 kg / pail |
Applications
- Furniture upholstery: foam and fabric bonding
- Loudspeaker fabric covering and veneer bonding
- Automotive seat, seat cover and headliner trim assembly
- Selected leather, PU leather, wood and plastic assemblies; validate adhesion before production
Application & handling
Prepare clean, dry bonding surfaces; use a substrate-compatible cleaning and treatment process.
Spray an even thin film with a suitable spray gun at approximately 15–20 cm from the substrate. Avoid uneven coverage or excessive local thickness.
Allow 10–30 minutes of flash-off before joining. Adjust for actual temperature, humidity, film thickness and substrate; validate the bonding window on a trial assembly. Join and press with suitable pressure. The supplied TDS reports best tensile strength after approximately 24 hours.
Apply at 5–45°C and RH below 80%. Store and transport at 5–45°C; protect from freezing and direct sun, and reseal the pail after use.
Rinse spray equipment thoroughly with clean water immediately after use. If dilution is necessary, use deionized water; confirm the dilution level before production.
Use adequate ventilation, eye protection and gloves. Control spray mist and select respiratory protection appropriate to the task. Request current product-specific SDS and compliance documentation before use.
Confirm current grade-specific technical and safety data, and validate performance on your actual parts before production.